Troubleshooting6.2
Symptom Possible Cause Remedy
No picture is displayed The power cord is 1.
disconnected.
The main power switch on 2.
the back of the display is not
switched on.
The selected input has no 3.
connection.
The display is in standby 4.
mode.
Plug in the power cord.1.
Make sure the power switch 2.
is switched on.
Connect a signal connection 3.
to the display.
Interference displayed on the
display or audible noise is
heard
Caused by surrounding
electrical appliances or
uorescentlights.
Move the display to another
location to see is the
interference is reduced.
Color is abnormal The signal cable is not
connected properly.
Make sure that the signal cable
isattachedrmlytothebackof
the display.
Picture is distorted with
abnormal patterns
The signal cable is not 1.
connected properly.
The input signal is beyond 2.
the capabilities of the
display.
Make sure that the signal 1.
cableisattachedrmly.
Check the video signal 2.
source to see if it is
beyond the range of the
display. Please verify its
specicationswiththis
display’sspecication
section.
Display image doesn’t ll up
the full size of the screen
The zoom mode is not correctly
set.
Use the Zoom mode or Custom
zoom function in the Screen
menutonetunedisplay
geometry and time frequency
parameter.
Can hear sound, but no
picture
Improperly connected source
signal cable.
Make sure that both video
inputs and sound inputs are
correctly connected.
CLEANING AND TROUBLESHOOTING
45
Comments to this Manuals