AG Neovo TX-15 User Manual download pdf (Page 19)

APPENDIX

4.5 Touch Screen Driver Installation

The TX-22 is available with USB connections. The touch driver is located on the enclosed

CD-ROM for these operating systems: VISTA, XP, 2000, CE, XP Embedded, Linux, Apple

Mac OS.

Please Note:

1. The TX-22 is Microsoft® Windows

HID (Human Interface Device) compatible if you use the USB

touch screen interface. No additional software driver is required for general operation of the touch

screen.

2. For TX-22, the system requires 15 seconds for Windows 7 to install/uninstall the touch drivers

while turning power on/off or plugging/unplugging USB cable.

4.5.1 TX-22 Driver Install Instructions

If you are using a PC running VISTA, XP, 2000, follow the instructions below:

1. Power on the computer.

2. Be sure the USB cable is connected from the PC to the LCD display.

3. Open the CD-ROM.

4. Follow the step-by-step instructions as shown on the pop-up windows.

If you are using a PC running Windows

XP Embedded, follow the instructions

below:

Express:

1. Power on the computer.

2. Make sure that the USB cable is connected to the computer.

3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by using the

EWF Manager command.

4. Once the EWF is disabled click on the XP driver on the CD-ROM and follow the step-by-step

instructions as shown on the pop-up windows.

Custom:

1. Power on the computer.

2. Make sure that the USB cable is connected to the computer.

3. Follow the step-by-step instructions found in the folder le on the CD-ROM.

1 2 ... 14 15 16 17 18 19 20 21

No comments

AG Neovo TX-15 User Manual Page 19